Key Takeaways
Treat sharpness as a chain of small controls, not a magic setting.
Stability comes first. Kelby treats sharpness as the combined result of camera support, focus, lens, and exposure choices. A sturdy tripod is the foundation for still subjects. Add a remote release or self-timer to avoid shaking the camera, and use mirror lock-up when extra stability matters. On a tripod, turn off image stabilization unless the lens instructions say otherwise. When light allows, try an aperture around two stops narrower than the lens's widest setting, and keep ISO low to limit noise.
Check before leaving. A small camera screen can make a blurry image look fine. Zoom in on the display to check focus while a retake is still possible. A tripod cannot rescue missed focus, and software sharpening cannot recreate detail the camera never captured.
The useful model here is a chain of tolerances: a strong lens and careful focus can still be undermined by one small vibration. That is a practical lesson in quality control, where preventing errors at the point of capture is cheaper than repairing them later. The advice also resists the lure of a single magic setting. Its limit is that maximal sharpness is not always the goal: a handheld, slightly imperfect image may better preserve a fleeting moment than a technically immaculate one.
Schedule the shot around light, then let the scene dictate exposure.
Time changes the photograph. For landscapes, Kelby favors the short windows around dawn and dusk: roughly 15 to 30 minutes before sunrise or sunset, and a limited stretch afterward. The low sun gives softer shadows and warmer color than harsh midday light. Dawn can also bring calmer water. Flowers benefit from overcast skies or the soft light after rain; indoors, a window without direct sun can act as a broad light source. Place a subject beside it so the light comes from the side, not straight on.
Shape light deliberately. For portraits outdoors, open shade softens hard sunlight and helps people avoid squinting. A reflector can bounce light into shadows. The aim is not simply to find more light, but to choose its direction, softness, and color.
This advice treats light as a compositional material, not merely a condition the camera must measure. The same subject can read as gentle, dramatic, or flat depending on direction and contrast, so timing becomes part of authorship. The practical payoff is especially clear for beginners, who often blame equipment for results caused by midday glare. Yet waiting for ideal light is not always feasible. Learning to use shade, windows, or reflectors makes the approach adaptable rather than dependent on perfect weather.
Move before you shoot; the ordinary viewpoint is usually the weakest.
Change the viewer's position. Kelby repeatedly warns against setting up where a photographer first arrives. Walk around, look through the viewfinder from different heights, and find a position that reveals a less familiar relationship between subject and setting. For flowers, that may mean kneeling to their level instead of looking down. For mountains, it may mean finding a higher viewpoint rather than photographing them from the road.
Remove visual noise. A strong frame gives the subject room to matter. Use a simple background, avoid cutting people at joints, and place a landscape horizon high or low according to whether sky or land deserves emphasis. A foreground, middle ground, and background can make a broad view feel layered. In wildlife or sports images, leave space in front of a moving subject so the frame does not feel like a trap.
The instruction to move is deceptively powerful because it turns composition into an active search rather than a camera setting. Small shifts can change what overlaps, what disappears, and where the eye lands. This resembles editing in miniature: the photographer removes distractions by changing position before relying on software. The advice is not a formula for novelty, though. An unusual angle can feel gimmicky if it obscures the subject, so perspective should clarify the image's idea, not merely prove that the photographer got low or climbed high.
Build nature photos with deliberate focus, depth, and weather choices.
Choose what stays sharp. For flowers, a zoom lens can isolate one bloom against a blurred background by using its widest aperture. A macro lens reveals tiny details, but its shallow depth of field makes stable support and careful focus essential. Wind creates a choice: use a fast shutter, such as 1/250 second, to freeze movement, or a slow one to show the flower swaying. For wildlife, focus on the animal's eyes and leave space in the direction it is moving.
Use the scene's conditions. A waterfall's silky appearance comes from a long exposure, often one or two seconds or longer, with a tripod and reduced light. For panoramas, keep exposure and focus consistent between frames and overlap neighboring images by about 20 to 25 percent. These are practical ways to control depth, motion, and continuity rather than leave them to chance.
Nature photography makes the tradeoffs visible: stopping motion, extending depth, and preserving low-light detail often compete for the same exposure. Kelby's recipes help a reader identify which variable to prioritize before pressing the shutter. That is more useful than treating camera modes as abstract menu choices. A recipe still needs judgment, however. A long exposure can make water elegant but erase the character of individual splashes, while a shallow focus can isolate a flower but hide its structure. The desired visual effect should lead the settings.
For portraits, simplify the background and put the eyes first.
Direct attention to the face. Kelby recommends portrait focal lengths around 85 to 100 mm, which allow a comfortable working distance and avoid the facial distortion associated with wide-angle views. Focus on the eyes. A plain backdrop, or an outdoor setting thrown out of focus, keeps the surroundings from competing with the person. The book suggests f/11 for many portraits, while also recommending a wider aperture outdoors when the background needs to blur.
Make light flattering. Open shade softens daylight; a window without direct sun provides gentle indoor side light. A reflector can lift shadows without adding a flash. For a newborn portrait, the book describes using dark clothing and a tight frame so the baby held by a parent becomes the clear subject. The technique is simple: manage the surroundings so expression and connection carry the image.
Portrait advice here is fundamentally about attention. Background simplicity, eye focus, and soft directional light all reduce competition for the viewer's gaze. That makes the subject feel more present without requiring elaborate studio equipment. The recommended aperture should be treated as a starting point, not a universal rule: distance, lens, and desired depth all affect how much of a face remains in focus. A portrait succeeds not because every setting is fixed, but because technical choices support the particular person and mood.
At weddings, plan for no retakes and protect every frame.
Prepare for a one-time event. A wedding unfolds in real time, so Kelby puts preparation ahead of improvisation. In a dim church, a high ISO and a fast lens help keep handheld images sharp. For flash, bouncing light off a ceiling or reflector can soften it; outdoor fill flash can open shadows on faces. For formal group portraits, start with the couple, then photograph the largest groups and release people as they are finished. Ask groups to close their eyes and open them together to reduce missed expressions.
Cover the story and the files. Follow the bride, but also photograph details such as rings, flowers, invitations, and the reception setting. Keep a spare memory card on hand and back up filled cards during the event. Kelby describes weddings involving hundreds of frames, with professional coverage sometimes reaching about 750 images. The job includes both capturing moments and ensuring they survive.
The wedding chapter is a lesson in operational design as much as image-making. A clear sequence reduces the time spent gathering people, while spare cards and immediate backups reduce the consequences of failure. The same principle applies anywhere the event cannot be repeated: make critical resources accessible before the pressure arrives. The risk is letting procedure dominate attention. A checklist should free the photographer to notice emotion, not turn a wedding into a mechanical inventory of poses and objects.
In sports, anticipate the play, freeze motion, and frame its story.
Get ready before action peaks. Kelby recommends a shutter speed of at least 1/640 second to stop most sports motion. Raise ISO when needed to reach that speed, use continuous shooting for a burst of frames, and pre-focus where an athlete is likely to arrive. Knowing the sport helps predict where the decisive moment will happen. A monopod can support a heavy lens without the immobility of a tripod.
Photograph more than the score. Focus on faces and expressions, not only the ball or winning play. The reaction of someone who missed a shot can tell as much as the celebration afterward. To show motion instead of freezing it, pan with the athlete at a slower shutter speed, around 1/30 or 1/60 second. Leave room in front of a moving player, and consider vertical framing when one athlete is the subject.
The central skill in action photography is anticipation. The camera can record a fraction of a second, but the photographer's knowledge of the game determines where that fraction is aimed. This connects technical readiness with narrative judgment: a losing athlete's reaction may carry more emotional information than the winning score. High-speed bursts help, but they do not replace timing or selection. More frames increase the chance of catching a usable instant while also creating a larger editing burden.
Use the camera's instant feedback to test, correct, and experiment.
Review with a purpose. Digital photography removes the per-shot cost of film and makes experimentation easier. Kelby advises checking the camera's LCD for color, blinking eyes, flash failure, and composition. Zoom in to judge focus, because a thumbnail can make blur look sharp. Highlight warnings, nicknamed the blinkies, mark areas that have lost detail to overexposure. If important highlights blink, reduce exposure in small steps, such as one-third of a stop, and try again.
Learn without overcorrecting. Exposure bracketing records lighter and darker versions when the camera's reading may be unreliable. The book says that, if perfect exposure is impossible, a slightly bright image can be easier to correct than a dark one because lifting shadows reveals noise. But blown highlights may contain no recoverable detail. Digital makes trial and error cheap, not consequence-free.
The LCD turns photography into a feedback loop: make an image, inspect a specific feature, adjust, and repeat. This is a form of deliberate practice, because the review becomes useful when it asks a concrete question rather than simply whether the picture looks pleasing. The exposure advice also needs context. Favoring brightness can help in some circumstances, but highlight clipping is destructive, and newer cameras vary in how much detail they preserve. The sound principle is to inspect important highlights and shadows, then expose for the image's priorities.
Choose RAW, JPEG, and print materials for the job, not by dogma.
Match the file to the task. RAW files preserve more captured data and allow white balance and tonal choices to be made during processing, but they take more space and can slow a camera's burst buffer. JPEG files are smaller and may suit fast sports sequences or situations where shooting speed matters. For JPEGs, choose a white-balance preset that matches the light instead of assuming Auto will always get it right.
Think beyond the screen. The intended print should guide resolution and paper choices. The book argues that photographers do not need ever-higher megapixel counts unless they plan to make larger prints. It recommends calibrating the monitor and using a color profile matched to the printer and paper. Its named printer models and specific product advice reflect the book's 2008 publication era; the transferable point is to manage the whole color path, from capture to output.
This section is strongest when read as a rejection of format tribalism. RAW and JPEG solve different constraints, just as a file optimized for editing differs from one optimized for rapid capture. The same output-first reasoning applies to resolution: more data matters when a particular print demands it, not as an automatic measure of artistic quality. Color management also reminds photographers that the final image is a system, not a screen preview. Hardware and software change quickly, so the workflow principle lasts longer than any product recommendation.
Back up in the field and never trust one card with everything.
Reduce the cost of failure. Memory cards can fail, so Kelby advises splitting a large shoot across several cards rather than placing every image on one. Once a card is full, copy it to a portable drive or another storage device as soon as practical. At weddings, the book recommends keeping a spare card physically on the photographer and making an onsite backup. A second copy back at the studio adds another layer of protection.
Protect the working kit. Carry spare batteries, especially in cold weather, and avoid changing lenses in dusty conditions. A lens hood can shield glass from knocks as well as flare; a protective filter may also help guard a lens. Keep full cards distinct from empty ones so the wrong card is not reused. The point is not to carry everything, but to prevent a small failure from destroying irreplaceable work.
Reliability is part of photographic craft because a beautiful image that disappears is functionally lost. Dividing files across cards is a basic form of risk distribution: one failure should not take the entire shoot with it. The same logic supports spare batteries and clear card labeling, which reduce avoidable mistakes under pressure. No storage device is invulnerable, and backups only help if they are checked and kept separate from the original. The book's field-first emphasis is valuable because it treats preservation as part of the shoot, not an administrative afterthought.
In cities, stay ready for chance and photograph details, not inventories.
Be ready for the fleeting frame. For street and travel photography, Kelby recommends a camera mode that handles exposure automatically while the photographer looks for the moment. His Barcelona example is an unexpected scene in an alley, found while walking rather than arranged in advance. Program mode can help capture such moments quickly; when a scene stays put, the photographer can take more control.
Tell the place through particulars. Rather than forcing an entire cathedral or landmark into one frame, photograph a window, doorway, sign, or architectural detail that suggests the larger setting. Seek bold color, simple backgrounds, and less familiar weather or viewpoints around famous landmarks. Photographing signs also preserves names and locations for later identification. The book notes that street details and distinctive people can add life, while crowds often make images harder to read.
Travel photography benefits from two complementary habits: readiness for the unplanned and restraint about what belongs in the frame. The unexpected alley scene rewards attention, while the detail-based approach lets one fragment evoke a larger place without pretending a single image can contain it all. This is also a useful distinction between documentation and interpretation. Still, a detail should not become a generic aesthetic trophy; captions, signs, and context can keep an evocative image anchored to the real location and its people.
Analysis
The Digital Photography Book is a practical field manual organized around the questions a photographer asks while looking at a scene. Its underlying argument is that better pictures rarely come from one secret setting. They come from a sequence of decisions: find suitable light, choose a viewpoint, stabilize the camera when needed, focus with intent, inspect the result, and preserve the file. The repeated recipes translate technical controls into actions, while stories about weddings, flowers, and travel make those actions memorable.
The book's most durable contribution is its attention to decisions before and after the shutter click. It tells readers to walk around before fixing a tripod, check focus on the camera display, carry a spare card, and think about the final print. That widens photography beyond the moment of exposure. A photograph is simultaneously a visual composition, a technical capture, and a file that must survive a workflow.
Its limits follow from its strengths. The conversational, directive style makes techniques accessible, but some recommendations are presented more absolutely than their contexts justify. Aperture, stabilization, exposure, and file format are tradeoffs, not universal laws. A still landscape and a moving wedding guest do not share the same priorities. In addition, the book's named cameras, software, prices, printer models, and megapixel guidance belong to its 2008 technology environment. They should not be treated as current buying advice.
The best way to use the book now is as a bank of visual problems and practical responses, not as a rigid recipe book. Ask what the picture needs: frozen motion or visible movement, full depth or selective focus, highlight detail or shadow detail, spontaneity or maximum stability. Then choose the technique that serves that need. Kelby's friendly shooting-buddy voice succeeds because it turns a complex craft into testable choices. Its deeper lesson is not to imitate a professional's gear, but to notice which decision is weakening the image and change that decision deliberately.
Review Summary
Most reviewers find The Digital Photography Book Volume 2 slightly less useful than Volume 1, noting its heavier focus on studio setup and wedding photography. Many appreciate Kelby's concise, conversational style, where each page delivers one clear tip without excessive theory. Readers who benefited most were those interested in flash, lighting, and portrait techniques. Critics felt the content skewed toward aspiring professionals rather than casual amateurs, and some found overlap with the first volume. Despite these critiques, most consider it a worthwhile companion read.
Glossary
tack sharp
Critically crisp focusA photographic description for an image that appears exceptionally sharp and clearly focused. Kelby treats it as the result of several factors working together, including stable camera support, precise focus, suitable exposure, and capable lenses. Post-processing sharpening can enhance captured detail, but it cannot fully replace focus or stability that was missing at capture.
The blinkies
Highlight clipping warningKelby's informal name for the flashing highlight warnings shown during image playback on some cameras. The warning identifies parts of an image that are overexposed enough to have lost detail. Photographers can use exposure compensation to reduce exposure and retake the image, while recognizing that some bright sources, such as the visible sun, may reasonably clip.
RAW
Unprocessed camera dataA camera file format that stores image data with less in-camera processing than JPEG. It gives the photographer more control over adjustments such as white balance and exposure during later processing, while typically requiring more storage and potentially slowing continuous shooting. RAW files are not finished images and usually need conversion before they can be shared or printed.
depth of field
Range appearing in focusThe portion of a photograph, extending in front of and behind the focused subject, that appears acceptably sharp. Aperture, lens choice, focus distance, and camera-to-subject distance affect it. A shallow depth of field can separate a flower or portrait subject from a blurred background, while a deeper one can keep more of a landscape or group in focus.
panning
Following a moving subjectA camera movement that tracks a moving subject during an exposure. When paired with a relatively slow shutter speed, the subject can remain comparatively sharp while the surroundings blur, conveying motion. Kelby recommends following through smoothly and using continuous shooting to increase the chance of capturing a sharp frame.
mirror lock-up
Reduces internal camera vibrationA camera function that raises and holds the reflex mirror before the exposure, reducing vibration from the mirror's movement in certain DSLR cameras. Kelby recommends it for demanding sharpness situations, particularly when using a tripod. It generally requires a separate shutter press or release after the mirror has moved.
TFP
Time exchanged for printsAn abbreviation for Time For Prints, a modeling arrangement described in the book. A model provides time for a photography session in exchange for photographs that can be used in the model's portfolio, rather than a standard fee. The arrangement does not replace a model release when the images are intended for commercial use.
Download PDF
Download EPUB
.epub digital book format is ideal for reading ebooks on phones, tablets, and e-readers.